Repairing Water Damage to Floors

Many types of home repairs seem pretty effortless for homeowners to do while others surely look like a specialist could be needed. Replacing flooring resulting from water damage might receive different feelings from various property owners. However, we will be looking at some of the basics below in hopes of making it look like a doable undertaking for homeowners.

There are different triggers for water damage to ones flooring in the home. Perhaps it is from a roof leak, which would likewise call for ceiling and possible wall replacement too. Or it could be from a slab leak which would most certainly require the help of a professional plumbing repair company and involve busting up the cement slab and re-pouring cement. . . all of which is a big undertaking. Or even, the water damage might be from a hot water heater, bathroom or kitchen plumbing leak.

The first action is to ensure one knows the reason for the water damage and is able to stop the leaking water. Once that is done, the flooring fix can start.

Clues of Water Damage to FlooringPlumbing Repair Cedar Hill TX

Wood Floors
Cupping – when the floor boards have dips or elevated edges.
Dark Spots – this might be clues of mold or mildew, and are not merely part of the wood grain.
Bulging – when floor boards bubble up.
Buckling – floor boards are totally loose from the floor underneath it.

Tile and Linoleum
Stains – stains or discoloration might be a sign of water damage for tile or linoleum.
Hollow sound – should there be a hollow sound is heard when tapped can indicate that the tiles are loose.

Steps to Repair Floors

Considering that we already are going to ensure the water leak is remedied, the next measure is to ensure that everything is dried out. We aren’t going to get into great depth in this article with utilizing fans, a dehumidifier or shop-vac, but make sure that the vicinity is entirely dry.

Eliminate the ruined flooring. Tools that may be necessary are a saw, pry bar, or a knife for linoleum. Cut out any areas of damaged flooring. Water damaged tiles will be loose underneath and uncomplicated to pry out. Regarding wood flooring, a saw shall be needed to remove the damaged areas. Try to stagger the cuts so when the new wood boards are added it will match better. Linoleum, if it is from a roll, will need to be cut back to walls. When it is from squares, it will likely be a lot easier to cut out the affected ones.

Next, check the condition of the subfloor. With regard to plywood subfloors, be sure that it isn’t damaged from the water, for concrete, again, be sure that it is dry.

After the subfloor is in very good shape, the replacement flooring may be put in. Many times, property owners may have extra wood or tile flooring sections kept from the initial installment. Regardless of whether the flooring was originally installed by a earlier homeowner, look within the garage and see if there is any remaining. When it’s a relatively new floor, additional pieces can be obtainable from a DIY store.

All the best . and with any luck, replacing flooring from a water heater or plumbing problem will not appear to be too big of a task for you now!